Product Template – BK PLUS

Description

22′ OVERALL VISOR LENGTH

19′ 1-1/2″ INSIDE MOUNT TO MOUNT

Pergola Depot custom pergola kit. This kit includes standard shipping, installation instructions, and the following pergola components: 2×6 mortised rafters, 2×8 double beams,  2×2 top slats and all stainless steel hardware included.

Important notes:

– Upon delivery (2) or more adults are required to inspect and unload the kit piece by piece from the back of the truck. This will take approximately 15-30 minutes for kits up to 20×20. DO NOT unload the kit using a forklift. 

– Pine Kits: Pressure Treated Pine must be assembled first and allowed to dry 2-4 months before staining or painting. DO NOT stain, seal, or paint pressure treated pine before the lumber has dried.

– Cedar Kits: For best results, we recommend sealing or staining your cedar pergola before you install it or very soon after installation.

– We recommend installing as soon as possible after receipt. To store the kit on a short-term basis prior to install, please make sure the lumber is out of the weather (garage, shed or under cover), neatly stacked and under a tarp if outside. It is not recommended to leave the pergola parts out on the ground to allow the drying time as this will cause parts to twist and bow. If it will be a day or two before you can install it, we recommend stacking the lumber neatly, and keeping it under a tarp or in a garage until you are ready to install it.

– This quote will expire in 30 days.