Denis J 20’X24′ Custom Freestanding Big Kahuna

Description

20’X24′ OVERALL PERGOLA DIMENSION

17’X21′ OUTSIDE POST TO POST DIMENSION

Pergola Depot custom pergola kit. This kit includes standard shipping, installation instructions, and the following pergola components:

• 6×6 posts
• 2×8 mortised rafters
• 2×8 double beams
• 2×2 top slats
• 2×6 angle braces
• 2×8 ledger board (for attached pergola kits only)
• Stainless steel hardware
• Optional post mounting hardware (ABU66RZ or ABU66Z)
• Optional post base trim

Important notes:

– Upon delivery (2) or more adults are required to inspect and unload the kit piece by piece from the back of the truck. This will take approximately 15-30 minutes for kits up to 20×20. DO NOT unload the kit using a forklift. 

– Pine Kits: Pressure Treated Pine must be assembled first and allowed to dry 3-4 months before staining or painting. DO NOT stain, seal, or paint pressure treated pine before the lumber has dried. For best results, we recommend sealing or staining your pine pergola after the pressure treatment has dried.

– Cedar Kits: For best results, we recommend sealing or staining your cedar pergola before you install it or very soon after installation.

– We recommend installing as soon as possible after receipt. To store the kit on a short-term basis prior to install, please make sure the lumber is out of the weather (garage, shed or under cover), neatly stacked and under a tarp if outside. It is not recommended to leave the pergola parts out on the ground to allow the drying time as this will cause parts to twist and bow. If it will be a day or two before you can install it, we recommend stacking the lumber neatly, and keeping it under a tarp or in a garage until you are ready to install it.

– This quote will expire in 10 days.

Thank you for considering Pergola Depot for your pergola kit! Contact us with any questions or changes to your quote request.